KALI LINUX ON A USB DRIVE A step-by-step guide from Juno Studios ====================================================== Imagine you want to play a video game on a console, but the game is not on the console's hard drive. You put the game on a USB stick, plug it in, and the console asks, "Do you want to play the game on the USB stick?" You say yes. That is exactly what we are going to do with Kali Linux. A "live USB" runs Kali straight from the flash drive. Nothing is installed on the computer. Unplug the drive and the computer is back to normal. WHAT YOU NEED ------------------------------------------------------ 1. A computer: Windows, Mac or Linux. 2. A USB drive: at least 8 GB (16 GB or 32 GB is better). WARNING: everything on this USB drive will be deleted. Back it up first. 3. The Kali Linux image: - Go to https://www.kali.org/get-kali/ - Choose "Live Boot" - Download the 64-bit live image - The file name looks like: kali-linux-20xx.x-live-amd64.iso METHOD 1: RUFUS (best for Windows) ------------------------------------------------------ Step 1: Get the tool 1. Go to https://rufus.ie/ 2. Download the latest version and open it. Step 2: Connect the USB drive 1. Plug your USB drive into the computer. 2. Under "Device", pick your USB drive. Double-check the name and size. Do NOT pick your computer's hard drive. Step 3: Choose the Kali file 1. Click SELECT. 2. Pick the Kali .iso file you downloaded. 3. "Partition scheme" and "Target system": if you are not sure, leave both on their default settings. Step 4: Start 1. Click START. 2. If Rufus says "ISOHybrid image detected", choose "Write in DD Image mode". This is what the Kali team recommends. 3. Confirm the warning that the drive will be erased. 4. Wait. This can take several minutes. Do not unplug the drive. 5. When the bar is green and says READY, you are done. Close Rufus. METHOD 2: BALENAETCHER (Mac, Linux or Windows) ------------------------------------------------------ Etcher is the simplest option. It only has three steps. 1. Download it from https://etcher.balena.io/ and open it. 2. Click "Flash from file" and pick your Kali .iso file. 3. Click "Select target" and choose your USB drive. 4. Click "Flash!" 5. Etcher writes the image and then checks its own work. When it says "Flash Complete!", your drive is ready. BONUS METHOD: VENTOY (one USB drive, many systems) ------------------------------------------------------ Ventoy is installed on the USB drive once. After that you just copy .iso files onto the drive, and pick one each time you boot. Download it from https://www.ventoy.net/ On Windows: 1. Unzip the download and run Ventoy2Disk.exe 2. Pick your USB drive and click Install. (This erases the drive.) On Linux: 1. Unpack the download and open a terminal in that folder. 2. Find the name of your USB drive: lsblk 3. Install Ventoy (replace sdX with your USB drive, for example sdb): sudo sh Ventoy2Disk.sh -i /dev/sdX Check the drive name twice. The wrong one erases your hard drive. Then, on any system: - Drag and drop the Kali .iso file onto the USB drive, like any other file. - No flashing is needed. You can add more .iso files later. HOW TO BOOT FROM THE USB ------------------------------------------------------ The easy way (Boot Menu): 1. Shut the computer down completely and plug in the USB drive. 2. Turn it on. As soon as you see the manufacturer logo, tap the boot menu key. It is usually F12. Other common keys: F11, F9, Esc, F2. 3. A menu lists your drives. Choose the USB drive. It often starts with "UEFI:". 4. In the Kali menu, choose "Live system". 5. In a few moments you will see the Kali desktop. On an Intel Mac: hold the Option key while it starts, then pick the USB drive. Apple silicon Macs (M1 and newer) cannot boot this image. The other way (BIOS / UEFI settings): 1. Turn on the computer and press the setup key shown on the first screen (often F2 or Delete). 2. Find the "Boot" or "Boot Order" section. 3. Move the USB drive to the top of the list. 4. Save and exit. TROUBLESHOOTING ------------------------------------------------------ - The USB drive is not in the boot menu: Try a different USB port. Tap the boot key earlier. - It refuses to boot: Open your BIOS / UEFI settings and turn off Secure Boot. - It freezes or shows errors: Flash the drive again, or try a different USB drive. Cheap and worn-out drives cause most problems. - Still stuck: Download the image again. The file may be corrupted. ONE RULE ------------------------------------------------------ Only test devices and networks that you own, or that you have clear permission to test. That is the difference between ethical hacking and breaking the law. Good luck! You are now a Kali Linux Master! Visit Juno-studios.com for more hacking tutorials. Any donations is greatly appreciated and goes towards more cool stuff! Appreciate the support and love <3 BTC Address; bc1qp07ehm5rwu7j5prd86f4t4kt4ly7k7vfnnlk0y